Overview2
1-1 Overview
The Simrad NX40/45 is a rugged, highly integrated
marine chartplotter and shnder. It is easy to use and
has a high resolution color display. Complex functions
can be performed with only a few key presses, taking the
hard work out of boating.
The available functions depend on the optional sensors
and instruments that are installed:
The Video window requires the NX40/45 to receive •
video from a compatible source, such as a camera.
Fuel functions require fuel sensors to be installed.•
SmartCraft engine functions require a SmartCraft •
system to be installed. For information on using
SmartCraft, see the SmartCraft Gateway Installation
and Operation Manual.
The NX40/45 can send data to other instruments, •
such as an autopilot, and receive data from other
instruments.
Radar functions require an optional Simrad radar •
system to be installed.
AIS functions require an optional AIS receiver to be •
installed.
For information on installation options.
This manual describes how to install and operate the
NX40/45. Special terms are explained in Appendix C. For
more information on this instrument and other Simrad
products, go to our website, www.simrad-yachting.com.
1-2 Cleaning and maintenance
The screen is covered by a proprietary anti-reection
coating. To avoid damage, clean the screen only with
a damp cloth and mild detergent when dirty or covered
in sea salt. Avoid abrasive cleaners, petrol or other
solvents. If a plug-in card gets dirty or wet, clean it with
a damp cloth or mild detergent.
Avoid walking on or jamming cables and connectors.
Place the cover over the display when the unit is turned
off.
To Next Page
Loading...
Need help?
General
