Simrad NX40 User Manual

Simrad NX40/45 Installation and Operation Manual76
18-1 Setup > System
> System
Language Select the language for the windows.
Tip: In case you can’t read the
current language, the language
setting is found at the top of the
system menu.
Backlight Select the backlight level for the keys
and display.
Night mode Night mode sets the palette for all
windows
Normal palette, for daytime
All windows have a palette
optimized for night time.
Beep volume Select the beep volume for key
presses.
Auto power off
Factory reset This option returns all of the unit
settings (except the language,
waypoints and routes) to the default
factory settings shown on the setup
menus.
About The about window shows:
The software version and date.
The world chart version.
Any card fitted.
The number of waypoints, routes and
tracks you have stored.
Connector wiring information.
In the unlikely event of having to
contact a Simrad dealer for service,
quote the software version number
and date.
Echosounder
Disable any echosounder
transducer and disable echosounder
functions.
A echosounder transducer is fitted.
Enable echosounder operation.
Radar
No appropriate Radar system is
fitted. Disable RADAR.
An appropriate Radar receiver is
fitted.
Enable AIS.
SmartCraft
No SmartCraft gateway is fitted.
Disable SmartCraft functions.
SmartCraft gateway is fitted.

Simrad NX40 Specifications

General

Brand	Simrad
Model	NX40
Category	Marine Equipment
Language	English