Skipping a waypoint with
the autopilot on might
result in a sudden course
change.
Going to a waypoint from the waypoints
window
to highlight the waypoint > > Goto
Going to a point on the chart
(waypoint)
Cancelling navigating
> Cancel goto
Tip: Before starting, create waypoints at points of
interest. Create a waypoint at the start of the trip for
you to navigate back to.
3-1-3 Following a route
A route is a list of waypoints that the boat can follow.
Starting a route from the chart window
> Start Route > to highlight a route > >
Forward (the order the route was created) or Reverse
The unit displays the chart with the route marked and
starts navigating from the start of the route. You can
also start a route from the Routes window.
Navigating
The unit navigates to each waypoint on the route in turn.
The unit stops navigating to the waypoint at the end of
the current leg and starts the next leg of the route:
when the boat comes within 0.025 nm of the •
waypoint;
when the boat passes the waypoint, or;•
if you skip the waypoint.•
Skipping a waypoint
> Skip
When the boat has reached the nal waypoint, or to stop
the boat following the route at any time, cancel the route.
Go to a chart window.
Cancelling a route
> Cancel route
To Next Page
Loading...
Need help?
General
