Simrad TV80 - Defining Receiver Parameters for the PI50 and PI60 Receiver Units

42
406388/B
4Intherelevantblockdiagram,selecttheserialporticon.
ObservethattheSerialPortSetupdialogboxopens.
5Makethenecessaryadjustments.
ThecommunicationparametersdenedforNMEA0183are:
•Baudrate:4800b/s
•Databits:8
•Parity:None
•Stopbits:1
Someinstrumentsmayofferotherparametersand/orchoices.Youmustalwayscheck
therelevantdocumentationprovidedbythemanufacturer.
6SelectOKtosavethechosensettingsandclosethedialogbox.
DeningreceiverparametersforthePI50andPI60Receiver
Units
TheReceiverdialogboxallowsyoutosetupthedetailedparametersforthesignalreception.
Itallowsyouto"netune"thereceiverforoptimalperformance.Seaconditionswillvary,
andtheacousticconditionsarealsochanging.
Prerequisites
ThisprocedureassumesthatareceiverhasbeenconnectedtotheProcessorUnitbymeans
ofaserialline,andthatthecommunicationlinehasbeeninitiated.
Procedure
1OpentheSetupmenu.
2OntheSetupmenu,selectInstallation.
ObservethattheInstallationdialogboxopens.
3ObservetheI/OSetuppageontherightsideoftheInstallationdialogbox.
Everyinterfaceispresentedasasmall"blockdiagram".
SimradTV80ReferenceManual