Simrad TV80 - Defining the IP Address on the Processor Unit Network Adapter

52
406388/B
•TheTV80softwarelicenseisavailable.
Procedure
1Dothefollowingpreparations.
aTurnontheProcessorUnit.
bVerifythatyouhaveadministrativerights.
cSwitchoffanyrewallapplications.
dOpentheoperatingsystems’sNetworkandSharingCenter,andsettheIPaddress
forthenetworkadapterusedtocommunicatewiththetransceiver.
•IPAddress:192.168.1.30
•Subnetmask:255.255.255.0
2InstalltheTV80operationalsoftware.
3OntheSoftwareLicensepage,installthesoftwarelicense(s).
4ConnecttheReceiverUnittotheProcessorUnit.
5SetuptheSR70ReceiverUnit/SR15ReceiverUnitintheTV80application.
6SetupthePI50/PI60ReceiverUnitintheTV80application.
7Selectthegearyouwishtouse.
8Selectoneormorecatchmonitoringsensors,andplacethemonthechosengear.
9OpentheReceiverdialogboxtodenetheparametersrelatedtoreception,suchas
lterandgain.
10OpentheMeasurementsdialogboxtoverifythateachsensorprovidestheexpected
information.
DeningtheIPaddressontheProcessorUnitnetworkadapter
ThecommunicationbetweentheProcessorUnitandtheSR70andSR15ReceiverUnits
ismadeusingahighspeedEthernetcable.Y oumustdenewhichIPAddressandSubnet
masktheEthernetadapterintheProcessorUnitshalluseforthiscommunication.Aslong
asyoudonotchangetheProcessorUnittoanothercomputer,orreplacethenetworkadapter
inyourProcessorUnit,youwillonlyneedtodothisonce.
Context
YouwillonlyneedtosetuptheIPaddressontheEthernetadapterifyouaregoingto
communicatewithanSR70orSR15ReceiverUnit.
SimradTV80ReferenceManual