Simrad TV80 - Selecting Measurement Units; Selecting the Location of the Menu

406388/B
83
Selectingmeasurementunits
TheTV80ispreparedtoworkwithseveralinternationalstandardsforunitsofmeasurements.
ThechoicesintheUnitsdialogboxallowyoutocontrolwhichunitsofmeasurements
thatareused.
Context
TheTV80userinterfacepresentsmanymeasurements.Thesemeasurementsarefor
examplerelatedtodepth,speedortemperature.UsetheUnitsoptionstoselecttheunitsof
measurementsyouwishtoworkwith.TheTV80usestheseinallpresentations.Youonly
needtodenetheseonce.
Procedure
1SelecttheDisplayicon.
TheiconislocatedundertheMainmenu.ItisusedtoopentheDisplaymenu.
2OntheDisplaymenu,selectUnits.
ObservethattheUnitsdialogboxopens.
3Adjustthesettingstotyourrequirements.
4SelectOKtosavethechosensettingsandclosethedialogbox.
Relatedtopics
Unitsdialogbox,page198
Selectingthelocationofthemenu
Insomesituations,youmaynditusefultochangethelocationofthemenubecauseitcan
hidepartoftheTV80presentation.
Context
ThemenusystemisbydefaultlocatedontherighthandsideoftheTV80presentation.You
canplacethemenuontherightoronthelefthandsideaccordingtoyouroperationalneeds.
Tip
Unlessyouneedtomakefrequentchangestotheoperationalparameters,youmaywishto
hidethemenufromtheTV80presentation.Tohidethemenu,selectMenuonthetopbar.
Toretrieveit,selectMenuonemoretime.
Operatingprocedures