Simrad TV80 - Defining the Serial Line Communication Parameters for the PI50 and PI60 Receiver Units

406388/B
61
DeningtheseriallinecommunicationparametersforthePI50
andPI60ReceiverUnits
ThecommunicationbetweenthePI50andPI60ReceiverUnitsandtheProcessorUnit
ismadeusinga(1:1)serialline.Allseriallinecommunicationisbasedonspecic
transmissionparameters.Theseparametersmustbedenedateachendoftheline,andthey
mustbesetupidentical.
Prerequisites
TheReceiverUnitisphysicallyconnectedtotheProcessorUnitusingaserialcable.
Procedure
1OpentheSetupmenu.
2OntheSetupmenu,selectInstallation.
ObservethattheInstallationdialogboxopens.
3ObservetheI/OSetuppageontherightsideoftheInstallationdialogbox.
Everyinterfaceispresentedasasmall"blockdiagram".
4Intherelevantblockdiagram,selecttheserialporticon.
ObservethattheSerialPortSetupdialogboxopens.
5Makethenecessaryadjustments.
ThecommunicationparametersdenedforthePI50andPI60ReceiverUnitsare:
•Baudrate:4800b/s
•Databits:8
•Parity:None
•Stopbits:1
6SelectOKtosavethechosensettingsandclosethedialogbox.
Gettingstarted