Simrad TV80 - Installing, Upgrading, and Removing the TV80 Software

72
406388/B
StartingandstoppingtheTV80program
Topics
StartingtheTV80program,page72
StoppingtheTV80program,page73
StartingtheTV80program
TheTV80isasoftwareprogram,andyoustartitjustlikeanyothercomputerprograms.
Youmustpowerupthedisplay,theProcessorUnit,andthesensorreceiver(s).
Prerequisites
Thisprocedureassumesthatyouhaveconnectedoneormoresensorreceiverstothe
ProcessorUnit.
Context
Theprogramisnot
automaticallystartedwhentheProcessorUnitisturnedon.Double-click
theTV80iconontheProcessorUnitdesktoptostarttheprogram.
Procedure
1Turnonthedisplay.
Ifrequired,refertotheinstructionsprovidedbythedisplaymanufacturer.
2TurnontheProcessorUnit.
Waitfortheoperatingsystemtostartup.
3OntheProcessorUnitdesktop,double-clicktheTV80icontostarttheprogram.
4Selectusersettings.
Duringtheprogramload,adialogboxappearstoletyouchoosefromthecurrentuser
settingsavailableontheTV80.Thedialogboxisonlyvisibleafewseconds.Youdo
notneedtomakeachoicehere.Youcanselectyourpredenedusersettingatanytime
bymeansoftheUserSettingsdialogboxontheMainmenu.
5OncetheTV80programhasstarted,observethatthepresentationllstheentirescreen.
Theprogramstartsupusingthesamesettingsasthelasttimeyouusedit.Ifthese
settingsareacceptable,continueoperation.Ifyouwishtoalteranyofthesettings,see
therelevantprocedures.
SimradTV80ReferenceManual