Sindoh M612 - Page 169

163
522
Send Image
Rescaling Failure (3)
Fail to set the resolution in the rescaling step for the
images to send
1. Reset the power.
523
Send Image
Rescaling Failure (4)
Fail to set the resolution in the rescaling step for the
images to send
1. Reset the power.
524
Send Image
Rescaling Failure (5)
Fail to rescale the images to send
1. Reset the power.
525
T4 Decoding Error
T4 Decoding error
1. Reset the power
526
T4 Encoding Error
T4 Encoding error
1. Reset the power
527
Invalid Scan Source
Invalid settings for scan source
1. Reset the power
528
T4 Encoding Failure
T4 Encoding failure
1. Reset the power
529
Invalid TX Coding
Type
Invalid settings for Tx coding type
1. Reset the power
530
Invalid RX Total
Page(1)
Invalid settings for the whole page in printing the received
image
1. Reset the power
531
Invalid RX Total
Page(2)
Invalid settings for the whole page in printing the received
image
1. Reset the power
532
Create Shared
Memory Failure
Fail to generate shared memory
1. Reset the power
533
Detach Shared
Memory Failure
Fail to release shared memory
1. Reset the power
534
Transfers image
data from the HDLC
buffer
Fail to transfer image data from HDLC buffer
1. Reset the power
535
Transmits one FCD
frame of image data
Fail to transfer FCD frame of the image data
1. Reset the power
536
DB Read Error
Error in reading DB value
1. Reset the power
537
DB Write Error
Error in writing DB value
1. Reset the power
538
DB Access Error
Fail to access DB
1. Reset the power
539
Invalid Dial No.
There is not a dial no. to send.
1. Reset the power
540
Fax Print Page
Setting Failure
Invalid management of order to print images
1. Reset the power
541
Fax Print Image
Setting Failure
A problem found from an image received in the printing
process
1. Reset the power
Service Error Codes (9xx)
Error
Description
Cause and Measure
910
Software Assert
A system down due to an invalid status during operation
of the system software
1. Check the presence of the problem yet after