Singer 560 - Standard Carriage Jamming

TECHNICAL HINTS
CONTENTS
IF YOU WANT TO... page
To unravel the rows knitted .................................... 101
To change the pattern controls or the other settings of the machine
in the course of pattern knitting .............................. 102
To turn off the machine during knitting ........................... 103
To knit stockinet in the course of pattern knitting .................. 103
To knit a selected pattern row repeatedly .......................... 103
To check the knitted row with the pattern on the Pattern Card ........ 103
WHAT TO DO IF ...
If the Standard Carriage has jammed ................. . ........... 104
If the Lace Carriage has jammed ................................. 105
If the Carriage has jammed in rib knitting ........... . ........ . .... 106
If P Carriage has jammed ....................................... 106
If a stitch has dropped during knitting only on the Knitter .... . ....... 107
If incorrectly knitted .......................................... 108
If a stitch has dropped when the Ribber is in use ....... . ........... 110
If stitches float when the Ribber is in use ......................... 110
If the end stitches are not stable or if the Carriage is heavy to operate .. 111
If the Ribber Arm does not fit on the Standard Carriage properly ...... 111
If you knit with the Knitter only as the Ribber is connected .......... 111
If you use 4-Colour Auto-Tension for knitting other than double
jacquard .............................................. ... . 111
If the Holder Button of the Yarn Changer were erroneously operated ... 112
If the Yarn Changer got stuck on the Needle Bed ................... 112
If a needle has been damaged ......... . ......................... 113
MAINTAINING THE MACHINE ........................ . ........... 114
DRAWING A PATTERN ON THE DESIGN· CARD ..................... 115
PATTERN AND STITCH TYPE POSSIBILITIES ....................... 116
- 100 -