Singer 560 - ENGLISH RIB; SWUNG ENGLISH RIB

REMOVE THE FABRIC FROM THE MACHIN E
-
_II 0 II
Cl
1. Cut yarn above Yarn Feeder.
Remove the yarn from Feeder and drop yarn end bet-
ween Knitter and Ribber sinker posts .
2. Remove Weights from Cast - on Comb.
3. Change Carriage settings as follows.
Cam Lever .............. ...... .... .... ...... .. O (STOCKINET)
Set Levers .. .. .. ...... .......... .. ........ .. .. 0
Russel Levers .. ...... .... .. ............ ..... II
4. Holding Cast-on Comb, move Carriage once across nee-
dles.
The stitches are released from needles.
- 70 -