Singer 560 - Removing the Fabric from the Machine

REMOVING THE FABRIC FROM THE MACHINE
c
To remove the knitted fabric from the machine without
closing the stitches, follow the procedure below.
Open the Yarn Feeder and remove the yarn from it.
Cut the yarn above the Yarn Feeder, and place the top
end in the clip on the Yarn Rod.
Let the bottom yarn end hang loosely on the side of the
fabric .
Set the Cam L ever to "0" (STOCKINET) and move the
Carriage across the fabric.
The fabric will come off of the needles .
- 14 -