Singer 560 - Repacking the Knitter

REPACKING THE KNITTER
UJ
Replace the Accessories in the Accessory Box.
Remove the Pattern Card from the Pattern Card Panel.
Do not fold or bend it.
Remove the Auto-Tension and the Knitter Arm from the
Knitter Carriage and pack them inside the Top Cover.
Secure the Carriage to the Needle Bed with the Carriage
Fastener.
Lay the Carriage Handle down.
Replace the Accessory Box on the right end of the needle
' bed.
Place the Top Cover onto the Needle Bed.
Fasten the latches.
TO ST OR E THE MACHIN E
Keep the machine away from.
1. Too much moisture.
2. Abnormal change of temperature.
3. Salt or chemicals.
- 48 -