Singer 560 - Drive Lace

0
u ~ I [] I • I • I • I WPI• •I ri1X I
• 0 • 0 0 0 0 0
lll t l / !1111 / 111 1 1 , 11111 , 11111 , 11111 11111 , 11 1 ·1····· 1 ····· 1
2
3
4
6
7
8
9
4
5
6 I Z t 8 24 30 42 48 54 60
36
a
0
DRIVE LACE
The needle arrangement is the same as for the Double Rib,
but on the knitter, the needles selected by the Pattern Card
are fed with the yarn, and those stitches are released to
form bigger loops, while on the Ribber all the needles knit
every row.
Light yarn is suitable for this type of knitting.
The sample is knitted with the Pattern No.12-(35).
NOTE: If the Drive Lace knitting follows the other pat-
tern knitting, turn OFF the machine once to clear
the
old memory before setting the machine for
"DRIVE LACE".
5
I' l
L!J
-
-
-
-
0- 1 Set machine controls as instructed.
- 81 -
Set Stitch Dials to the same as main knitting.
Do not use the Button 1 with its right light on
and Button 3, 4 and
6.
- 2 Arrange needles as instructed and knit from the
left to the right with waste yarn.
- 3 When suspending Cast-on Comb (without Weights),
insert it so that its teeth face Ribber Sinker Posts
as iII ustrated.