Singer 560 - K2. P2. RIB

CD
@
@
For practice, continue to knit in K1. P1. rib following the
instructions set forth.
1. Set the Half Pitch Lever to "P".
2. Transfer every other stitch from Knitter onto Ribber
and from Ribber onto Knitter alternately to rearrange
the needles for K1.P1. RIB using Double-eye Transfer
Tool as follows.
CD Insert eye of Double-eye Transfer Tool into Ribber
needle hook .
Cl> Pull Ribber needle to D position .
Q) Push Ribber Needle to A position .
@ Remove eye of Transfer Tool from Ribber needle hook.
@ Insert opposite eye into Knitter needle hook.
@ Tilt Transfer Tool until stitch slides into Knitter needle
hook.
Remove Transfer Tool.
Push needle in B position slightly towards A position
ensuring that transferred stitch lies correctly in needle
hook.
Continue to transfer every other stitch till all the needles
are aligned as shown .
Ensure empty needles are in A position.
3. Knit 20 rows.
K1. P1. RIB IS KNITTED.
Referring to page 71, remove the fabric from the machine .
- 68 -