Sirona C3 Plus - Product Disposal Information; Returning Electrical Devices

Sirona Dental Systems GmbH 17 Disposal
C3
+
17.1 Returning electrical devices
59 06 404 D 3390
D 3390.201.01.18.02
119
17 Disposal
17.1 Returning electrical devices
Environme ntally sound dis posal
Your product is marked with the adjacent symbol. Within
the European Economic Area, this product is subject to
Directive 2002/96/EC as well as the corresponding
national laws. This directive requires environmentally
sound recycling / disposal of the product. The product
must not be disposed of as domestic refuse!
Please observe the disposal regulations applicable in
your country.
Disposal procedure
Please note that this product is subject to the stipulations
in EC Directive 2002/96 governing waste electrical and
electronic equipment and must be disposed of in line
with these special requirements within the European
Union (EU).
Prior to disassembly / disposal of the product, it must be
fully prepared (cleaned / disinfected / sterilized).
When disposing of equipment permanently, please pro-
ceed as follows:
In Germany:
To initiate return of the electrical device, please send a
disposal order to "enretec GmbH".
1. You can find a form for placing a disposal order on
the company's homepage at www.enretec.de under
the menu item "Entsorgung elektrischer und elek-
tronischer Geräte" (Disposal of electrical and elec-
tronic devices). The form can either be downloaded
or filled out online.
2. Fill out the form with the corresponding details and
send it either as an online order or fax it to enretec
GmbH at +49(0)3304 3919 590.
You can also get in touch with the following contacts
for disposal orders and any questions relating to this
you may have:
Phone: +49(0)3304 3919 500;
E-mail: pickup@eomRECYCLING.com
Post: enretec GmbH, Geschäftsbereich eomRECY-
CLING Kanalstrasse 17, 16727 Velten, Germany
 If your unit is not permanently installed, it will be
collected from the practice. If it is permanently
installed, it will be picked up curbside at your
address by appointment.
All disassembly, transport and packaging costs are to be
borne by the owner / operator of the equipment. The dis-
posal itself is free of charge.