Sirona C3 Plus - Program Selection

Sirona Dental Systems GmbH 7 Program selection
C3
+
7.3 Program selection
59 06 404 D 3390
D 3390.201.01.18.02
39
7.3 Program selection
Keys for selecting the programmed patient positions.
For a swiveling cuspidor:
Before the chair moves to the selected program position,
the swiveled-in cuspidor automatically returns to its
starting position.
Factory settings:
The operating light switches OFF automatically before
the chair moves to the entry / exit position 0 or the mouth
rinsing position S.
The operating light switches ON automatically after the
chair has reached patient position 1 or 2.
Changing the factory settings:
When programming the patient positions you can preset
whether the operating light should switch OFF or ON in
the different chair programs 0, S, 1 or 2 (see page 45).
Program key 0
Intended for the entry/exit position.
Program key S with last position memory function.
In the S program, you are able to program the flushing
of the cuspidor (page 68) and / or the tumbler filling
(page 68).
If this key is pressed a second time, the treatment center
returns to its previous position (last position memory
function).
Example: You have programmed this key for the mouth
rinsing position. When you press
this key, the patient
chair moves to the programmed position.
Last position memory function: When you press this
key a second time, the patient chair returns to its pre-
vious position.
00
SS
22
11
00
SS