SMA MEDIUM VOLTAGE POWER STATION 500SC-JP - Mounting and Disassembly Work

12.3 Mounting and Disassembly Work
12.3.1 Mounting and Disassembly Work in the Inverter
12.3.1.1 Disassembling and Mounting the Protective Covers
Figure 51: Position of the protective covers
Position Designation
A Protective cover
Danger to life due to electric shock or electric arc if live components are touched
• Switch off the inverter and wait at least 15minutes before opening it to allow the capacitors to discharge
completely.
• Disconnect the inverter (see Section7, page96).
Disassembling the protective covers
Requirements:
☐ The panels must be disassembled (see Section12.3.1.2, page164).
Procedure:
• Disassemble the protective covers.
12 Periodic Actions
SMA Solar Technology AG
System Manual 163MVPS22JP-SH-en-11