SMA MEDIUM VOLTAGE POWER STATION 500SC-JP - Symbols on the Product

Symbol Explanation
There is an error in the inverter.
An error has occurred in the communication with the inverter.
3.14 Symbols on the Product
The following gives an explanation of all the symbols found on the devices of the MVPowerStation and on the type
labels.
Symbol Designation Explanation
CE marking The product complies with the requirements of the applicable EU di-
rectives.
Protection classI All electrical equipment is connected to the grounding conductor sys-
tem of the product.
Degree of protectionIP54 The product is protected against interior dust deposits and splashing
water from all angles.
Beware of a danger zone This warning symbol indicates a danger zone. Be particularly vigilant
and cautious when working on the product.
Warning regarding dan-
gerous voltage
The product operates at high voltages. All work on the product must
be carried out by qualified persons only.
Beware of hot surface The product can get hot during operation. Avoid contact during oper-
ation. Allow the product to cool down sufficiently before carrying out
any work. Wear personal protective equipment such as safety
gloves.
Use hearing protection The product generates loud noises. When working on the product,
wear hearing protection.
Observe the documentation Observe all documentation supplied with the product.
3 Product Overview
SMA Solar Technology AG
System Manual 39MVPS22JP-SH-en-11