SMART KAPP-IQ65-V2 Installation And Maintenance Guide

CHAPTER 6
ORIENTING AND CALIBRATING THE DISPLAY
51 smarttech.com/kb/171167
To calibrate the display when connected to a computer
1. Open SMART Settings:
Operating
system
Procedure
Windows 10
a.
Select Start.
b.
Scroll to and select SMART Technologies > SMARTSettings.
Windows 8
a.
Open the Apps screen.
b.
Scroll to and select SMART Technologies > SMARTSettings.
Windows 7 Select Start > All Programs > SMART Technologies >
SMARTTools>SMARTSettings.
macOS
a.
Press the SMARTBoard icon on the Mac menu bar.
b.
Press SMARTSettings.
SMART Settings appears.
2. Press SMART Hardware Settings.
3. If more than one SMART product is connected to your computer, select the display.
4. Select Advanced Settings from the drop-down list.
5. Press Calibrate, and then follow the on-screen instructions.
The calibration screen appears. This can take a few moments.
6. Press the red target with the tip of a pen. Hold the tip at the center of the target until the target
turns green, and then lift the pen.
The target moves to the next location.
NOTE
You can calibrate a target again by pressing the LEFT ARROW key on your keyboard.

SMART KAPP-IQ65-V2 Specifications

General

Brand	SMART
Model	KAPP-IQ65-V2
Category	Monitor
Language	English