Smartgen ALC404 - Scheduled Start;Stop Operation; Scheduled Start Mode Select Operation

ALC404 LIGHTING TOWER CONTROLLER USER MANUAL
ALC404 Lighting Tower Controller 2018-11-06 Version 1.1 Page 14 of 83
4.4 SCHEDULED START/STOP OPERATION
4.4.1 SCHEDULED START MODE SELECT OPERATION
Scheduled start operation has four modes to choose (00 daily, 01 weekly, 02 monthly and 03 custom
week). The following content take the Scheduled Start (00 daily) as the example, and the other modes’
operation method is likewise. Detailed operation process is as below,
Table 6 – Scheduled Start Setting
No.
Process
Description
Panel Display
1
Enter into
Auto Start
Mode
Selection
navigation
screen
Press key to enter into Auto Start mode,
indicator besides it illuminates, simulteniouly,
Auto Start Mode Selection screen will be
displayed. Then choose 02 Scheduled Start via
pressing or .
2
Enter into
Auto Timer
Mode
detailed
setting
navigation
screen
Press key to enter into Auto Timer
Mode setting screen, and select 03 Timer
Configure option via pressing or . Then
press or to enter into Timer Runing
Action setting page and choose 01 Timer Mode
Select through pressing and .
3
Timer Mode
Select
Press key to enter into 01 Timer Mode
Select setting screen, and press again to
select 00 Daily option via pressing or .
Then press to confirm and save the setting.
At this time, through pressing or to
return to auto timer mode detailed setting
navigation screen.
4
Auto Run
Timer Set
In auto timer mode detailed setting screen,
press or to select 02Auto Run Timer
Set.
Press to enter into 02Auto Run Timer Set
screen, and then press again to configure
Start Time and Duration Time through , and
keys.
If setting completely, press or to
return to the auto timer mode detailed setting
navigation screen and select Return by pressing
or keys.
Press to return to Auto Timer Mode
Timer Running Action
02Auto Run Timer Set
Start Time Duration
18:30 12:00
Timer Running Action
Return
01Timer Mode Select
02Auto Run Timer Set
01Timer Mode Select
00Daily
00Daily
Timer Running Action
Return
01Timer Mode Select
02Auto Run Timer Set
Timer Running Action
Return
01 Mode Start
02 Mode Close
03 Timer Configure
Auto Start Mode Selection
01 Remote Start Mode
02 Auto Timer Mode
03 Sunrise/set Mode