Configuring Your SmartRG™ - Common Use Cases
S m a r t R G © 2 0 1 2 C o n f i d e n t i a l P a g e | 23
5. IMPORTANT - Check “Enable Quality of Service” if you intend to support QoS classified
traffic through the WAN service.
6. Click Apply/Save.
Enabling QoS for routed IPTV service configurations will improve channel change
performance.
802.1P (priority) and 802.1Q (VLAN tag) values will be set at the time of WAN Service
creation as detailed in, “Creating the WAN Service.”
Configuring the Layer 2 Interface (VDSL/PTM with VLAN Tags)
In some applications it may be necessary to segment the PTM WAN interface into separate VLANs.
A common application for a VLAN segmented WAN interface is bridged IPTV as detailed in the
“Bridged IPTV Configuration” section. To configure the layer 2 PTM interface to support VLAN
tagged traffic select “VLAN MUX Mode” for “Connection Mode” in step 4 of the “Configuring the
Layer 2 Interface (PTM – Supported on ADSL and VDSL)” section.
To Next Page
Loading...
