SmartRG SR10 - Managing Your SmartRG Gateway; Save, Restore or Default Configurations

Managing Your SmartRG™ Gateway
S m a r t R G © 2 0 1 2 C o n f i d e n t i a l P a g e | 57
Managing Your SmartRG™ Gateway
Save, Restore or Default Configurations
To save the existing gateway configuration to your hard drive:
1. Select Management -> Settings -> Backup.
2. Click Backup xxx Settings.
NOTE
Two types of settings are available for backup:
- Running Settings: settings governing the gateway’s operation at the present time
- Default Settings: settings restored at the time of a factory default
You have the ability to create your own custom default settings.
To restore a previously saved gateway configuration as the gateway’s running settings:
1. Select Management -> Settings -> Update.
2. Click the Choose File button (under the “Update working settings” section) and browse to
find the saved config file on your hard drive (e.g. mySmartRGRunningConfig.conf)
3. Click Update Working Settings.
To restore a previously saved gateway configuration as the gateway’s default settings:
1. Select Management -> Settings -> Update.
2. Click the Choose File button (under the “Update Default Broadband Router settings”
section) and browse to find the saved config file on your hard drive (e.g.
mySmartRGDefaultConfig.conf)
3. Click Update Settings.
To restore the gateway to default settings:
1. Select Management -> Settings -> Restore Defaults.
2. Click Restore Default Settings.