Configuring Your SmartRG™ - Common Use Cases
S m a r t R G © 2 0 1 2 C o n f i d e n t i a l P a g e | 53
21. Select an “Ether Type” of IP (0x800).
22. Enter the “Differentiated Service Code Point (DSCP) Check” value.
AF21 (DSCP18) is common for Mediaroom STBs.
23. Assign the Classification Queue (identified by WAN interface&Precedence&Path).
24. Click Apply/Save. The correct classifier configuration for VoIP and IPTV services should look
like:
Figure 45 QoS VoIP and IPTV Classifier Configurations
The QoS configuration is now complete.
To Next Page
Loading...
