SmartRG SR10 - Configure User Logins; Changing User Passwords

Managing Your SmartRG™ Gateway
S m a r t R G © 2 0 1 2 C o n f i d e n t i a l P a g e | 61
Configure User Logins
SmartRG gateways support the following user roles:
- admin – unrestricted access by a PC connected to a LAN port
- support – unrestricted access by an ISP technician connected through the managed WAN
interface
To change user passwords:
1. Select Management -> Access Control -> Passwords.
2. Enter the username (admin –or- support).
3. Enter the old password and the new password.
4. Click Apply/Save.
NOTE
Default username/password values are:
- admin/admin (when accessed from the LAN) –and-
- support/support (when accessed from the WAN)