SMC Networks 6726AL2 - Configuring 802.1 X Global Settings; Figure 3-31 802.1 X Configuration

U SER A UTHENTICATION
3-69
Configuring 802.1X Global Settings
The 802.1X protocol includes port authentication. The 802.1X protocol
must be enabled globally for the switch system before port settings are
active.
Command Attributes
• 802.1X System Authentication Control – Sets the global setting for
802.1X. (Default: Disabled)
Web – Select Security, 802.1X, Configuration. Enable 802.1X globally for
the switch, and click Apply.
Figure 3-31 802.1X Configuration
CLI – This example enables 802.1X globally for the switch.
Console(config)#dot1x system-auth-control 4-108
Console(config)#