SMC Networks 6726AL2 User Manual

B ASIC C ONFIGURATION
3-23
If you download to a new destination file, go to the System/File/Set
Start-Up menu, mark the operation code file used at startup, and click
Apply. To start the new firmware, reboot the system via the System/Reset
menu.
Figure 3-9 Select Start-Up Operation File
To delete a file select System, File, Delete. Select the file name from the
given list by checking the tick box and click Apply. Note that the file
currently designated as the startup code cannot be deleted
Figure 3-10 Deleting Files

SMC Networks 6726AL2 Specifications

General

Brand	SMC Networks
Model	6726AL2
Category	Network Router
Language	English