C
OMMAND
L
INE
I
NTERFACE
4-236
show map ip precedence
This command shows the IP precedence priority map.
Syntax
show map ip precedence [interface]
interface
• ethernet unit/port
- unit - Stack unit. (This is unit 1)
- port - Port number. (Range: 1-26/52)
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
map ip port (Global Configuration) (4-230)
map ip precedence (Interface Configuration) (4-232)
Console#show map ip precedence ethernet 1/5
Precedence mapping status: enabled
Port Precedence COS
--------- ---------- ---
Eth 1/ 5 0 0
Eth 1/ 5 1 1
Eth 1/ 5 2 2
Eth 1/ 5 3 3
Eth 1/ 5 4 4
Eth 1/ 5 5 5
Eth 1/ 5 6 6
Eth 1/ 5 7 7
Console#
To Next Page
Loading...
Need help?
General
