SMC Networks 6726AL2 - System Management Commands

C OMMAND L INE I NTERFACE
4-32
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
System Management Commands
These commands are used to control system logs, passwords, user names,
browser configuration options, and display or configure a variety of other
system information.
Console#quit
Press ENTER to start session
User Access Verification
Username:
Table 4-7 System Management Commands
Command Group Function Page
Device
Designation
Configures information that uniquely identifies this
switch
4-33
User Access Configures the basic user names and passwords for
management access
4-34
IP Filter Configures IP addresses that are allowed management
access
4-37
Web Server Enables management access via a web browser 4-40
Telnet Server Enables management access via Telnet 4-44
Secure Shell Provides secure replacement for Telnet 4-46
Event Logging Controls logging of error messages 4-59
Time (System
Clock)
Sets the system clock automatically via NTP/SNTP
server or manually
4-72