SMC Networks 6726AL2 - Show Map Ip Dscp

P RIORITY C OMMANDS
4-237
show map ip dscp
This command shows the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - Stack unit. (This is unit 1)
- port - Port number. (Range: 1-26/52)
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
map ip dscp (Global Configuration) (4-233)
map ip dscp (Interface Configuration) (4-233)
Console#show map ip dscp ethernet 1/1
DSCP mapping status: enabled
Port DSCP COS
--------- ---- ---
Eth 1/ 1 0 0
Eth 1/ 1 1 0
Eth 1/ 1 2 0
Eth 1/ 1 3 0
.
.
.
Eth 1/ 1 61 0
Eth 1/ 1 62 0
Eth 1/ 1 63 0
Console#