SMC Networks 6726AL2 - Spanning-Tree Spanning-Disabled

S PANNING T REE C OMMANDS
4-189
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
spanning-tree spanning-disabled
This command disables the spanning tree algorithm for the specified
interface. Use the no form to reenable the spanning tree algorithm for the
specified interface.
Syntax
[no] spanning-tree spanning-disabled
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
This example disables the spanning tree algorithm for port 5.
Console(config)#spanning-tree transmission-limit 4
Console(config)#
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree spanning-disabled
Console(config-if)#