SMC Networks 6726AL2 - Show Mac-Address-Table Aging-Time

A DDRESS T ABLE C OMMANDS
4-181
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding
information.
Example
show mac-address-table aging-time
This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console(config)#mac-address-table aging-time 100
Console(config)#
Console#show mac-address-table aging-time
Aging time: 100 sec.
Console#