SMC Networks 6726AL2 User Manual

C OMMAND L INE I NTERFACE
4-136
show access-group
This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
SNMP Commands
Controls access to this switch from management stations using the Simple
Network Management Protocol (SNMP), as well as the error types sent to
trap managers.
Console#show access-group
Interface ethernet 1/25
IP standard access-list david
MAC access-list jerry
Console#
Table 4-39 SNMP Commands
Command Function Mode Page
snmp-server
community
Sets up the community access string to permit
access to SNMP commands
GC 4-137
snmp-server
contact
Sets the system contact string GC 4-138
snmp-server
location
Sets the system location string GC 4-138
snmp-server host Specifies the recipient of an SNMP
notification operation
GC 4-139
snmp-server
enable traps
Enables the device to send SNMP traps
(i.e., SNMP notifications)
GC 4-141
show snmp Displays the status of SNMP communications NE,
PE
4-142

SMC Networks 6726AL2 Specifications

General

Brand	SMC Networks
Model	6726AL2
Category	Network Router
Language	English