SMC Networks 6726AL2 - Tacacs-Server Key; Tacacs-Server Port

A UTHENTICATION C OMMANDS
4-103
tacacs-server port
This command specifies the TACACS+ server network port. Use the no
form to restore the default.
Syntax
tacacs-server port port_number
no tacacs-server port
port_number - TACACS+ server TCP port used for authentication
messages. (Range: 1-65535)
Default Setting
49
Command Mode
Global Configuration
Example
tacacs-server key
This command sets the TACACS+ encryption key. Use the no form to
restore the default.
Syntax
tacacs-server key key_string
no tacacs-server key
key_string - Encryption key used to authenticate logon access for
the client. Do not use blank spaces in the string.
(Maximum length: 20 characters)
Default Setting
None
Command Mode
Global Configuration
Console(config)#tacacs-server port 181
Console(config)#