C
OMMAND
L
INE
I
NTERFACE
4-92
• File information is shown below:
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered
up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec
Table 4-26 File Directory Information
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config file.
startup Shows if this file is used when the system is started.
size The length of the file in bytes.
Console#dir 1:
f i l e n a m e f i l e t y p e s t a r t u p s i z e ( b y t e )
---------------------------- -------------- ------- -----------
Unit1:
Diag_V2.2.1.3.bix Boot-Rom image Y 196020
V2.1.5.4.bix Operation Code N 1745120
V2.2.2.2.bix Operation Code Y 1745500
Factory_Default_Config.cfg Config File N 5013
startup Config File Y 6023
------------------------------------------------------------------
To t a l f r e e s p a c e : 340787
Console#
To Next Page
Loading...
Need help?
General
