SMC Networks 6726AL2 - Spanning Tree Commands; Table 4-50 Spanning Tree Commands

C OMMAND L INE I NTERFACE
4-182
Spanning Tree Commands
This section includes commands that configure the Spanning Tree
Algorithm (STA) globally for the switch, and commands that configure
STA for the selected interface.
Table 4-50 Spanning Tree Commands
Command Function Mode Page
spanning-tree Enables the spanning tree protocol GC 4-183
spanning-tree mode Configures STP or RSTP GC 4-184
spanning-tree
forward-time
Configures the spanning tree bridge
forward time
GC 4-185
spanning-tree
hello-time
Configures the spanning tree bridge hello
time
GC 4-185
spanning-tree
max-age
Configures the spanning tree bridge
maximum age
GC 4-186
spanning-tree
priority
Configures the spanning tree bridge
priority
GC 4-187
spanning-tree
path-cost method
Configures the path cost method for
RSTP
GC 4-188
spanning-tree
transmission-limit
Configures the transmission limit for
RSTP
GC 4-188
spanning-tree
spanning-disabled
Disables spanning tree for an interface IC 4-189
spanning-tree cost Configures the spanning tree path cost of
an interface
IC 4-190
spanning-tree
port-priority
Configures the spanning tree priority of
an interface
IC 4-191
spanning-tree
edge-port
Enables fast forwarding for edge ports IC 4-191
spanning-tree
portfast
Sets an interface to fast forwarding IC 4-192
spanning-tree
link-type
Configures the link type for RSTP IC 4-193