A
CCESS
C
ONTROL
L
IST
C
OMMANDS
4-129
Default Setting
None
Command Mode
Global Configuration
Command Usage
• When you create a new ACL or enter configuration mode for an
existing ACL, use the permit or deny command to add new rules to
the bottom of the list. To create an ACL, you must add at least one
rule to the list.
• To remove a rule, use the no permit or no deny command followed
by the exact text of a previously configured rule.
• An ACL can contain up to 32 rules.
Example
Related Commands
permit, deny (MAC ACL) (4-130)
mac access-group (4-132)
show mac access-list (4-131)
Console(config)#access-list mac jerry
Console(config-mac-acl)#
To Next Page
Loading...
Need help?
General
