C
OMMAND
L
INE
I
NTERFACE
4-212
private vlan association
Use this command to associate a primary VLAN with a secondary (i.e.,
community) VLAN. Use the no form to remove all associations for the
specified primary VLAN.
Syntax
private-vlan primary-vlan-id association {secondary-vlan-id |
add secondary-vlan-id | remove secondary-vlan-id}
no private-vlan primary-vlan-id association
• primary-vlan-id - ID of primary VLAN.
(Range: 1-4094, no leading zeroes).
• secondary-vlan-id - ID of secondary (i.e, community) VLAN.
(Range: 1-4094, no leading zeroes).
Default Setting
None
Command Mode
VLAN Configuration
Command Usage
Secondary VLANs provide security for group members. The associated
primary VLAN provides a common interface for access to other
network resources within the primary VLAN (e.g., servers configured
with promiscuous ports) and to resources outside of the primary
VLAN (via promiscuous ports).
Example
Console(config-vlan)#private-vlan 2 association 3
Console(config)#
To Next Page
Loading...
