C
OMMAND
L
INE
I
NTERFACE
4-162
show rate-limit
Use this command to display the rate limit granularity.
Default Setting
Fast Ethernet interface – 3.3 Mbps
Gigabit Ethernet interface – 33.3 Mbps
Command Mode
Privileged Exec
Command Usage
• For Fast Ethernet interfaces, the rate limit granularity is 512 Kbps, 1
Mbps, or 3.3 Mbps.
• For Gigabit Ethernet interfaces, the rate limit granularity is 33.3 Mbps.
Example
Console#show rate-limit
Fast ethernet granularity: 1000
Gigabit ethernet granularity: 33300
Console#
To Next Page
Loading...
