SMC Networks 6726AL2 User Manual

S YSTEM M ANAGEMENT C OMMANDS
4-59
Event Logging Commands
logging on
This command controls logging of error messages, sending debug or error
messages to switch memory. The no form disables the logging process.
Syntax
[no] logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory.
You can use the logging history command to control the type of error
messages that are stored.
Table 4-17 Event Logging Commands
Command Function Mode Page
logging on Controls logging of error messages GC 4-59
logging history Limits syslog messages saved to switch memory
based on severity
GC 4-60
logging host Adds a syslog server host IP address that will
receive logging messages
GC 4-61
logging facility Sets the facility type for remote logging of syslog
messages
GC 4-62
logging trap Limits syslog messages saved to a remote server
based on severity
GC 4-63
clear logging Clears messages from the logging buffer PE 4-64
show logging Displays the state of logging PE 4-64
show log Displays log messages PE 4-67

SMC Networks 6726AL2 Specifications

General

Brand	SMC Networks
Model	6726AL2
Category	Network Router
Language	English