C
OMMAND
G
ROUPS
4-13
The access mode shown in the following tables is indicated by these
abbreviations:
NE (Normal Exec)
PE (Privileged Exec)
GC (Global Configuration)
ACL (Access Control List Configuration)
IC (Interface Configuration)
LC (Line Configuration)
VC (VLAN Database Configuration)
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
4-177
Spanning Tree Configures Spanning Tree settings for the switch 4-182
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs
4-197
GVRP and
Bridge Extension
Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for the
bridge extension MIB
4-217
Priority Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for
each priority queue, also sets priority for TCP/UDP
traffic types, IP precedence, and DSCP
4-222
Multicast Filtering Configures IGMP multicast filtering, query
parameters, and specifies ports attached to a
multicast router
4-238
IP Interface Configures IP address for the switch 4-249
Table 4-4 Command Groups (Continued)
Command Group Description Page
To Next Page
Loading...
Need help?
General
