B
ASIC
C
ONFIGURATION
3-25
- running-config to tftp – Copies the running configuration to a TFTP
server.
- startup-config to file – Copies the startup configuration to a file on
the switch.
- startup-config to running-config – Copies the startup config to the
running config.
- startup-config to tftp – Copies the startup configuration to a TFTP
server.
- tftp to file – Copies a file from a TFTP server to the switch.
- tftp to running-config – Copies a file from a TFTP server to the
running config.
- tftp to startup-config – Copies a file from a TFTP server to the
startup config.
- file to unit
2
– Copies a file from this switch to another unit in the
stack.
- unit to file
2
– Copies a file from another unit in the stack to this
switch.
• TFTP Server IP Address – The IP address of a TFTP server.
• File Type – Specify config (configuration) to copy configuration
settings.
•
File Name
— The file name should not contain slashes (\ or /),
the
leading letter of the file name should not be a period (.), and the
maximum length for file names on the TFTP server is 127 characters
or 31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9,
“.”, “-”, “_”)
Note: The maximum number of user-defined configuration files is
limited only by available flash memory space.
2. These operations are not supported for this switch.
To Next Page
Loading...
Need help?
General
