Navigating the Web Browser Interface
3-7
3
VLAN 3-122
802.1Q VLAN
3-122
GVRP Status Enables GVRP VLAN registration protocol 3-125
802.1Q Tunnel
Configuration
Enables QinQ Tunneling on the switch 3-126
Basic Information Displays information on the VLAN type supported by this switch 3-126
Current Table Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
3-126
Static List Used to create or remove VLAN groups 3-128
Static Table Modifies the settings for an existing VLAN 3-129
Static Membership by Port Configures membership type for interfaces, including tagged,
untagged or forbidden
3-131
Port Configuration Specifies default PVID and VLAN attributes 3-132
Trunk Configuration Specifies default trunk VID and VLAN attributes 3-132
Tunnel Port Configuration Adds ports to a QinQ tunnel 3-138
Tunnel Trunk Configuration Adds trunks to a QinQ tunnel 3-138
Private VLAN 3-141
Status Enables or disables the private VLAN 3-141
Link Status Configures the private VLAN 3-141
Protocol VLAN 3-142
Configuration Configures protocol VLANs 3-142
Port Configuration Configures protocol VLAN port type, and associated protocol
VLANs
3-143
Priority 3-144
Default Port Priority Sets the default priority for each port 3-144
Default Trunk Priority Sets the default priority for each trunk 3-144
Traffic Classes Maps IEEE 802.1p priority tags to output queues 3-145
Traffic Classes Status Enables/disables traffic class priorities (not implemented) 3-147
Queue Mode Sets queue mode to strict priority or Weighted Round-Robin 3-147
Queue Scheduling Configures Weighted Round Robin queueing 3-148
IP Precedence/DSCP Priority
Status
Globally selects IP Precedence or DSCP Priority, or disables
both.
3-149
IP Precedence Priority Sets IP Type of Service priority, mapping the precedence tag to
a class-of-service value
3-150
Table 3-2 Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General
