Snap-On Solus - Custom Setup

45
Operations Saving Captured Data
Figure 5-42 Data Management menu option
A list of all saved files displays.
3. Select the file that you would like to review (Figure 5-43).
Figure 5-43
Sample saved data list
NOTE:
i Movie files are saved with a SC(M) file type designation.
4. Select the Review button to set the data viewing speed.
z To save a frame file:
1. Select the Save button from the toolbar.
A drop-down menu displays (Figure 5-40).
NOTE:
i The Setup button in the far right corner of the toolbar provides a shortcut to the Save Data menu
(Utilities > Tool Setup > Save Data) so you can quickly reconfigure where and how the data is
saved. See “Save Data” on page 56 for details.
2. Select Save Frame from the menu.
The Setup Saved Data Notation dialog box displays (Figure 5-41).
3. Use the drop-down lists to enter vehicle information.
4. Select Save to close the dialog box.
A saving data message displays. Once the message clears, the file is ready for reviewing.
z To review a frame file:
1. Select the Saved Data button from the main menu.
2. Select the Data Management option (Figure 5-42).
A list of all saved files displays.
3. Select the file that you would like to review (Figure 5-43).