Snap-On Solus - Storage Tips; Disposing of the Batteries

58
Operations Utilities
Date
Selecting Date lets you set the date that displays in the Saved Data properties.
z To set the date:
1. Select Utilities > Tool Setup > Date.
The Date dialog box displays.
2. Select the Day, Month, Year, or Style field.
A drop-down list displays (Figure 5-62).
Figure 5-62
Sample Date dialog box
3. Select an option from the drop-down list.
The drop-down list closes automatically.
4. Press N/X to close the Date dialog box.
Time
Selecting Time lets you set the time that displays in the Saved Data properties.
z To set the time on the system:
1. Select Utilities > Tool Setup > Time.
The Time dialog box displays (Figure 5-63).
Figure 5-63
Sample Time dialog box
2. Select the Hour, Minutes, or 12/24 field.
A drop-down list displays.
3. Select an option from the drop-down list.
The drop-down list closes automatically.
4. Press N/X to close the Time dialog box.