Snom D712 - Using Different Dialing Methods; Auto Dial; Redialing; Automatic Redialing on Busy

43
D712/710 User Manual Using the Phone
Using different dialing methods
Auto dial
If a time span in seconds has been selected from the drop-down menu at Advanced > Behavior >
Phone Behavior > Auto Dial, the phone will dial the number on the display when the specified number
of seconds (2, 5, 10, or 15 seconds) has elapsed.
Redialing
1. Press
to show the last 100 numbers dialed, with the very last number at the top.
2. Press
to dial that number or use / to select a dierent number and then press .
Automatic redialing on Busy
When a dialed number is busy, the phone will redial the number automatically after 10 seconds.
In admin mode this feature can be turned o on the phone's web interface, Advanced Settings >
Behavior > Phone Behavior > Automatic Redial on Busy > "o". You can set a shorter or longer
period of seconds in the textfield of Redial after (sec.).
Calling number from call history (missed, received, dialed calls)
1. Open the list from the idle screen:
◦ Missed calls: Press the right arrow
on the navigation key.
◦ Received calls: Press the left arrow
on the navigation key.
◦ Dialled calls: Press the confirmation key
.
2. Use
/ to select a phone number.
3. Press
to dial the number.
Calling number from phone directory
1. Press
Dir
.
2. Use
/ to select a name or enter the first letter(s) of the name on the alphanumeric keypad.
3. Press
to dial the number.
Calling number from external directory
1. Open the dial screen to get access to the external directory:
a. Lift the handset o the cradle or press the speakerphone key to open the dialing screen
(Fig. 1).
b. Press
Pool
to show the list of available directories and call lists.
c. Select the external directory, in our example LDAP (Fig. 2).