31
D712/710 User Manual Getting to Know Your Phone
User mode/administrator mode
Snom phones can be operated in administrator or user mode. In administrator mode, all settings are
accessible and can be modified; in user mode, a number of settings are not accessible. The factory
default is administrator mode.
When the phone is running in user mode, the administrator password is required to revert to
administrator mode. The default administrator password is 0000 (4 x zero). We recommend that you
change the password.
Note: Do not forget to write the new password down and store it in a safe place; without
it, a TFTP reset to factory values is necessary to return the phone to administrator mode.
If your phone is administered centrally, user mode may be the rule. Please check with
your administrator.
User mode on the phone
In user mode, a number of settings are inaccessible. See "Settings" on page 25.
User mode on the web interface
In user mode, some windows like "Preferences" are accessible while others are not. The menu item
"Advanced" is available, but the settings normally found on the page are not. In user mode, the two
pages look like this:
To return the phone and its web interface to administrator mode, enter the administrator password in
Administrator Login and click on "Apply". The default password is 0000 (4 x zero). The two pages in
administrator mode look like this:
To Next Page
Loading...
