50
D712/710 User Manual Using the Phone
Dropping a participant
1. Press
/ or / , depending on your FW version, to select the participant.
2. Press to terminate the connection to this participant; you remain connected to the other
participant.
Transferring calls
You can transfer connected calls as well as calls ringing on your phone.
• When you have a call on the line, there are two ways to transfer it to a third party:
◦ Announcing the call to the third party first, to make sure the call is welcome and will be
accepted: Attended transfer;
◦ Transferring the call unannounced: Blind transfer. There will be no feedback on whether the
third party is available and/or picking up the call.
• When a call is ringing on the idle phone, you can transfer it to a third party without answering it
first (blind transfer only).
Attended transfer
1. Put the call on hold.
2. Dial the number you want to transfer the call to and announce the call. You can enter the number
manually or select one from a directory or list in the "Pool" submenu.
3. If the third party agrees to accept the call, press
Xfer
.
4. Press . You will briefly see the messages on the display that the connections to the third party,
i.e., the Transfer Party, and the held call were terminated on your phone, indicating that the call
was transferred successfully.
To Next Page
Loading...
