70
D712/710 User Manual Customizing the Phone Settings
Note: If you want the activity on the monitored phones to be displayed on your
idle screen, enable the "Go to Call Monitor on Activity" on the Advanced Settings
page > Behavior tab > Phone Behavior section.
Editing an existing identity/account
In administrator mode only!
On the phone
1. Press
Settin
> 3 Identity > 3 Edit Identity > 2 Edit Identity.
2. Press
to scroll down to the identity you want to edit or press its number key.
◦ When you are at the top of the list, pressing
on the navigation key will take you to the end of
the list.
◦ At any other position within the list, press
or to scroll up or down.
3. Press
to open edit mode for the marked identity.
4. Edit each setting you want to edit and press
after each one.
5. Press
briefly to return to the Edit Identity menu, or press for 3 seconds to return to the idle
screen.
On the web interface
Open the Configuration page of the identity and make the changes in the text fields. See "Configuring
new identity/account", section "On the web interface" on page 68 for more information.
If you have changed the account or the registrar, click on "Re-Register" and "Save". If you have made
other changes, clicking on "Apply" and "Save" suces.
Assigning ringtones to identities
The phone has 10 built-in ringtones that can be assigned to identities, group types, and contact types.
It is also possible to download a custom melody. When an incoming call to an identity is ringing, the
phone will play the ringtone assigned to that identity, unless it is a call from a VIP or a group with a
distinctive ringer of their own.
Assigning ringtones to contact type VIP and group types: See "Directories" on page 65.
Note: Ringers assigned to the contact type VIP and to any of the group types override
the ringers assigned to identities. For example, if you have assigned Ringer 1 to one of
the identities and Ringer 2 to the group "Colleagues", the phone will play Ringer 2 when
a contact from the "Colleagues" group calls that identity.
If your ringtones don’t seem to work as expected, contact your administrator. There
may be an overriding setting on the PBX.
To Next Page
Loading...
