18
D712/710 User Manual Getting to Know Your Phone
LED indicators
Call indicator
The bright-red LEDs situated around the upper right corner of the phone indicate incoming, ongoing,
held, and missed calls. They will be:
• Blinking rapidly when a call is coming in.
• Glowing steadily when dialing, when in a call, and when there was a missed call. In case of a
missed call.
◦ To view the details of the missed call press
on the navigation key to show the "Missed" call
screen and simultaneously turn o the LED.
• Blinking slowly when a call is on hold.
Message key LED
Glowing red when there is a new message on the mailbox.
Function key LEDs
Depending on the function mapped onto the key, the green LEDs on the key will be activated when the
key event occurs. The factory setting is "line".
• When the default setting "line" is mapped onto the key, the LED will:
◦ blink rapidly when a call is ringing on the line;
◦ glow steadily when there is an ongoing call on the line;
◦ blink slowly when a call is on hold on the line.
• When other functions are mapped onto the keys, the LEDs may also glow or blink. See also
"Configuring the function keys" on page 58. Example: When the "extension" function has been
mapped onto a key to monitor a specified extension, the LED will:
◦ blink rapidly when a call is ringing on the extension;
◦ glow steadily when the extension is busy.
Audio key LEDs
The LEDs on the speakerphone and headset keys light up when and for as long as the respective
audio mode is turned on. In idle mode, the LED lights up when DND is turned on; when in a call, the
LED lights up when the microphone is muted.
For more information, see the table at "Audio Control Keys" on page 20.
To Next Page
Loading...
